• SAI on-line RT9W de 1 KVA 900W para rack 19
  • SAI on-line RT9W de 1 KVA 900W para rack 19
  • SAI on-line RT9W de 1 KVA 900W para rack 19
  • SAI on-line RT9W de 1 KVA 900W para rack 19
  • SAI on-line RT9W de 1 KVA 900W para rack 19
  • SAI on-line RT9W de 1 KVA 900W para rack 19
1 6

1 KVA 900W RT9W on-line UPS for 19-inch rack

SKU: UP141
🛒 PVP RECOMENDADO
€441,02
Base imponible sin impuestos incluidos

CARACTERÍSTICAS DEL PRODUCTO

  • UPS with C14 power connector in black. Includes 1.5 meter C13 to C14 cable.
  • Operating voltage: 230V with 50 or 60Hz auto-detection. Auto-detection 4.2A.
  • Operating modes: On-line, battery mode, bypass mode, eco mode, frequency converter mode, fault mode.
  • Includes accessories for rack-mounting the UPS in a 19' rack format, as well as bases to place the UPS in tower format.
  • LCD display for monitoring the UPS operating mode.
  • Front panel with ON/MUTE start buttons, Select to display UPS parameters, OFF/ENTER, UPS shutdown and confirmation when in configuration mode.
  • Audible alarm on startup, battery mode, overload, low battery and UPS fault.

Low stock: 9 left

    View full details
    Single-phase UPS (Uninterruptible Power Supply) with online double-conversion technology, which uses a rectifier and current inverter, offering an electrical signal free of harmonics and voltage peaks, protecting the installation where they are connected. Device designed to provide electrical current for a limited time to all devices connected to the UPS. It has an internal automatic voltage regulator (AVR) that filters current fluctuations to keep the alternating current supplied to the devices connected to the UPS stable.

    Specifications
    • UPS with C14 power connector in black. Includes 1.5 meter C13 to C14 cable.
    • Operating voltage: 230V with 50 or 60Hz auto-detection. Auto-detection 4.2A.
    • Operating modes: On-line, battery mode, bypass mode, eco mode, frequency converter mode, fault mode.
    • Includes accessories for rack-mounting the UPS in a 19' rack format, as well as bases to place the UPS in tower format.
    • LCD display for monitoring the UPS operating mode.
    • Front panel with ON/MUTE start buttons, Select to display UPS parameters, OFF/ENTER, UPS shutdown and confirmation when in configuration mode.
    • Audible alarm on startup, battery mode, overload, low battery and UPS fault.
    • It has 3 female schuko ports for device connection.
    • Capacity: 1000VA/900W load, possibility of connecting a battery bank to increase UPS autonomy.
    • Startup time: 7 to 10 seconds.
    • Autonomy: backup for loads >80% is limited to 4min. For loads between 70%, the limit is 10min. Below 70%, autonomy is not limited.
    • It has RJ45 IN/OUT connector for protection of devices with this interface.
    • Possibility of installing an SNMP module for remote UPS management via Local network or Internet (not included).
    • It has USB connection and DB9 COM port for UPS management.
    • Software compatible with Windows, Mac OS X, Linux, Unix systems.
    • Dimensions: 438 x 87 x 310 mm (width x height x depth).
    • Complies with regulations: ISO 9001, ISO 14001 and RoHS.