• SAI on-line torre Optima-RT10 de 6000VA 6000W
  • SAI on-line torre Optima-RT10 de 6000VA 6000W
  • SAI on-line torre Optima-RT10 de 6000VA 6000W
  • SAI on-line torre Optima-RT10 de 6000VA 6000W
1 4

Optima-RT10 6000VA 6000W online tower UPS

SKU: UP144
🛒 PVP RECOMENDADO
€1.854,71
Base imponible sin impuestos incluidos

CARACTERÍSTICAS DEL PRODUCTO

  • Tower format UPS with two modules: UPS and batteries (BAT).
  • Operating voltage: 230V with 50 or 60Hz auto-detection. Auto-detection 4.2A.
  • Features an AC power connection terminal (Terminal Block type) on the UPS module. INPUT AC (L.N,GND), OUTPUT AC (L,N,GND).
  • The UPS module connects to the battery module (BAT) using a DC cable supplied with the equipment.
  • Operating modes: On-line, battery mode, bypass mode, eco mode, frequency converter mode, fault mode.
  • LCD display for monitoring the UPS operating mode.
  • Front panel with ON/MUTE start buttons, Select to show UPS parameters, OFF/ENTER for UPS shutdown and confirmation when in configuration mode.
  • Audible alarm on startup, battery mode, overload, low battery, and UPS fault.

15 in stock

    View full details
    Single-phase Uninterruptible Power Supply (UPS) with on-line double conversion technology, which uses a rectifier and current inverter, offering an electrical signal free of harmonics and voltage spikes, protecting the installation where they are connected. Device designed to provide electrical current for a limited time to all devices connected to the UPS. It has an internal automatic voltage regulator (AVR) that filters current fluctuations to keep the alternating current reaching the devices connected to the UPS stable.

    Specifications
    • Tower format UPS with two modules: UPS and batteries (BAT).
    • Operating voltage: 230V with 50 or 60Hz auto-detection. Auto-detection 4.2A.
    • Features an AC power connection terminal (Terminal Block type) on the UPS module. INPUT AC (L.N,GND), OUTPUT AC (L,N,GND).
    • The UPS module connects to the battery module (BAT) using a DC cable supplied with the equipment.
    • Operating modes: On-line, battery mode, bypass mode, eco mode, frequency converter mode, fault mode.
    • LCD display for monitoring the UPS operating mode.
    • Front panel with ON/MUTE start buttons, Select to show UPS parameters, OFF/ENTER for UPS shutdown and confirmation when in configuration mode.
    • Audible alarm on startup, battery mode, overload, low battery, and UPS fault.
    • Capacity: 6000VA / 6000W load, possibility to connect a battery bank to increase the UPS autonomy.
    • The battery module consists of 20 12V 7AH batteries.
    • Startup time: 7 to 10 seconds.
    • Autonomy: backup for loads >80% is limited to 4min. For loads around 70%, the limit is 10min. Below 70%, autonomy is unlimited.
    • Features an RJ45 IN/OUT connector for protecting devices with this interface.
    • Possibility to install an SNMP module for remote UPS management via local network or Internet (not included).
    • Features a USB connection and DB9 COM port for UPS management.
    • Software compatible with Windows, Mac OS X, Linux, Unix systems.
    • UPS dimensions: 438 x 88 x 610 mm (width x height x depth).
    • Battery module dimensions: 438 x 133 x 438 mm (width x height x depth).
    • Complies with regulations: ISO 9001, ISO 14001, and RoHS.